Paired body seams
Shoulder difference: 0.0 mm. Effective side-seam difference: 0.14 mm.
Free made-to-measure wrap dress
Create a real wrap dress pattern from your measurements
Draft two mirrored crossover fronts, a shaped back, long and short waist ties, neckline binding, and armhole binding as one connected set. Overlap is a measured construction value, not a decorative V-neck preset.
Test the wrap closed, moving, and seated
Paper checks confirm seam lengths and the requested geometric overlap. They cannot predict how a particular fabric opens at the neckline or skirt while walking, sitting, or bending. Sew a full toile, install both ties, and test coverage before cutting final fabric.
Generated wrap dress and finishing pieces
Measured proof
What the default 92 cm bust example produces
One connected draftThe diagram is generated by the production service. Its front coverage, binding lengths, darts, ties, allowances, and checks are the same geometry used by the downloadable files.
Inputs used
- Bust
- 92 cm
- Waist
- 74 cm
- Hips
- 100 cm
- Skirt length
- 72 cm
- Waist overlap
- 10 cm
- Long tie
- 90 cm
A passed check confirms a paper relationship within tolerance. Personal fit, neckline stability, skirt coverage, and fabric behaviour still require a toile.
Generate my wrap dress
Choose a starting direction, then edit every measurement and construction value.
Calculated relationships
The crossover is geometric
The front crosses centre by 10.0 cm at the waist. Its diagonal neckline edge is 45.5 cm.
Bindings use generated lengths
The neckline strip is 59.1 cm including working margin; each armhole strip is 39.5 cm including working margin.
Included pattern pieces
Mirrored wrap fronts and back
One front pattern cut twice as mirror images, plus one back cut on the fold.
Long and short waist ties
Separate pieces for the outer wrap and the hidden inside anchor.
Bias bindings
Measured strips for the diagonal neckline edge and both sleeveless armholes.
Related guides
Measure
Dress measurement guide
Check bust, waist, hip, bodice balance, shoulder, armhole depth, and bust-point measurements before drafting.
AlternativeBasic dress generator
Use the basic dress when you need a centre-fold front or want neckline and armhole choices without a wrap closure.
CuttingSeam and hem allowances
Learn why the solid sewing line and dashed cutting line must be checked separately, especially around the diagonal edge.
Further readingPattern and sewing guides
Continue with the measurement, allowance, construction, and printing guides before cutting a crossover neckline and moving skirt.
Pattern details
The front really overlaps
Each front crosses the centre at the waist by the selected amount. The wrap edge continues to the hem instead of pretending a V-neck on a centre-fold dress is a closure.
Bust and waist shaping remain measurable
The front keeps a side-bust dart and continuous waist shaping. The back is drafted from the same body values, and shoulder and effective side seams are checked.
Two different ties for two jobs
The long outer tie wraps around the body; the shorter inner tie anchors the underlap. Finished width and each length are independent inputs.
Bindings come from drawn edges
The diagonal wrap edge and complete sleeveless armhole are measured after drafting. Their bias-strip lengths include a small working margin instead of unrelated defaults.
Why this is not another dress preset
A wrap dress changes the front topology, closure, and finishing
The existing basic dress presets alter ease, hem sweep, neckline, and shaping while keeping a front cut on the fold. A wrap dress cannot be represented by those controls: its two fronts overlap, open at one edge, anchor with ties, and need deliberate treatment along the diagonal neckline. This generator drafts those structural differences explicitly.
Coverage is measured from centre front
Wrap overlap is the horizontal distance each front continues beyond centre at the waist. More overlap improves static coverage but also adds fabric and can create bulk. It is not the same as ease: ease changes the garment circumference, while overlap changes how far one front lies over the other.
The diagonal edge needs stability
The front edge runs from the shoulder-neck point, through the selected crossover depth, to the measured overlap beyond centre front at the waist. Because this edge contains bias, it can stretch during handling. Stay it promptly, avoid hanging the unfinished dress, and compare the binding with the actual solid sewing line before attaching it.
The hidden and visible ties are intentionally unequal
Both ties attach at the waist end of their mirrored wrap edges, not at the pattern's own side seam. The short tie anchors the underlap inside; the long tie passes through the marked opening in the opposite side seam and around the body. Transfer the two opening marks to the matching back seam and reinforce its ends. Length depends on waist, knot style, and desired tail, so one automatic ratio cannot suit every closure plan.
The crossover does not remove bust shaping
A diagonal neckline can look forgiving while still pulling from the bust to the waist. The front keeps a side-bust dart and waist shaping based on bust-point measurements. Move or rotate darts only after a toile shows where the apex and neckline tension sit on the wearer.
This version is deliberately sleeveless
The generated armhole is shaped for a sleeveless finish and receives a measured bias strip. A set-in sleeve needs a different armhole and a cap solved to that curve, so no decorative sleeve is implied. Start from the basic dress if the design requires a separate sleeve workflow.
Sweep, length, and wrap edge interact
More hem sweep increases movement and the amount of cloth crossing at the front. A longer skirt travels farther during a stride, so midi versions usually benefit from more overlap than a short version. Test stairs, sitting, and a full walking stride in the toile.
Decisions before final fabric
A passed pattern still needs a coverage test
The generator can make connected geometry, but wrap garments are unusually sensitive to movement, wind, drape, and tie placement. Use the checks as a drafting baseline and the toile as the decision point.
Classic, full-overlap, and midi are starting directions
Presets change ease, skirt length, sweep, neckline depth, overlap, and long-tie length. They do not change the selected body measurements. Review the populated values instead of treating a preset name as a finished size.
Check neckline and skirt separately
A front can cover well at the waist yet gape at the bust, or lie securely at the neckline yet open during a long stride. Pin the planned tie points, then test bending, sitting, stairs, and walking before judging coverage.
Drape and opacity matter together
Fluid cloth follows the body attractively but can reveal more when the fronts separate. Crisp cloth holds the neckline but may create bulk at the ties. Hold two layers against light and test a tied sample before committing.
Do not stretch the bias edge
Measure the paper line, stay the fabric edge, and apply binding without feeding extra length into either layer. If the neckline grows before finishing, a perfectly calculated strip cannot restore the intended shape reliably.
Before cutting final cloth
Use this order to separate printing, construction, and fit errors.
- 01 Print at 100% and measure the 5 × 5 cm square horizontally and vertically.
- 02 Walk shoulder and side seams, then compare each binding strip with its solid attachment line.
- 03 Mark centre front, overlap amount, waistline, tie attachment points, both limits of the side-seam tie exit, darts, grainlines, and the front-edge fold.
- 04 Sew both mirrored fronts, the back, both ties, and the real edge finish in the toile.
- 05 Test neckline security, waist placement, skirt coverage, sitting, stairs, and a long stride.
From pattern to look
Plan the finished garment
Before you cut fabric, browse wrap dress ideas in Nastix Design and decide which silhouette and details you want to make.
How and when
Generated from application code
This generator converts the entered measurements into vector geometry. Where a construction has related seams, the software can calculate their lengths; preview, SVG, copyshop PDF, and tiled A4 PDF are produced from the same geometry. These software checks do not replace printing, sewing, or fitting a test sample.
Last recorded review of the generator implementation and documentation: 2026-10-18. The output has not been certified through physical production testing; verify measurements, print scale, seam relationships, fabric behaviour, and fit for your project.
Wrap dress questions
What to know before generating
Does the A-line preset in the basic dress already make a wrap dress?
No. That preset widens the hem of a front cut on the fold. It does not create two overlapping fronts, an opening edge, inside anchoring, ties, or wrap-edge finishing.
Is the dress drafted from my measurements?
Yes. Size buttons only prefill values. Body widths, balance, darts, length, overlap, ties, bindings, allowances, and every export are recalculated from the submitted fields.
What exactly does wrap overlap mean?
It is how far the front edge crosses beyond centre front at the waist on the paper pattern. It is separate from wearing ease and should be tested for coverage in motion.
Why are there two tie lengths?
The hidden tie secures the underlap inside the dress. The longer tie secures the outer front and usually travels farther around the waist. Their jobs and useful lengths differ.
What are the two marks beside the waist on the side seam?
They bound the opening for the inner tie to pass through. Transfer them to the corresponding back side seam, leave that short section unstitched, and reinforce both ends. They are separate from the tie attachment mark on the wrap edge.
Are sleeves included?
No. This is a complete sleeveless version with armhole bindings measured from the generated opening. A sleeve requires a different armhole and matched sleeve-cap draft.
Are the bias strips exact cut lengths?
Each strip uses the generated attachment line plus a 3 cm working margin for joining and handling. Walk the strip against the paper line and trim after construction rather than assuming fabric behaves identically.
Does the generator guarantee the neckline will not gape?
No. It calculates the edge and shaping, but bust shape, posture, fabric stretch, stay tape, and tie position affect gaping. A toile with the actual closure is essential.
Which fabrics suit this pattern?
Stable viscose, crepe, light linen blends, chambray, and soft cotton poplin are useful starting points. Check opacity through two layers and avoid unstable bias stretch until the fit is proven.
How should I print the A4 PDF?
Print at actual size or 100% with fit-to-page disabled. Verify the 5 × 5 cm square before assembling the pages or cutting fabric.